About us

Support

Environment

Careers

micro::station

The fully modular micro::station combines s::can instruments to a compact and versatile system. It presents a complete solution, as the user only has to connect water supply and -discharge (“plug & measure”) in order to receive a previously unheard variety of immediately available information and parameters at no extra cost.

 

The s::can micro::station is designed for OnLine monitoring of water quality parameters in clean media, such as drinking water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel.

 

micro::station – the s::can solution for water analysis – compact and easy like never before.

[cq_vc_hotspot image=”18928″ icontype=”number” position=”10%|50%,15%|13%,35%|13%,45%|29%,80%|29%,87%|29%,94%|29%,35%|85%,54%|64%,66%|90%,70%|50%,90%|85%” iconbackground=”rgba(30,137,191,0.8)” circlecolor=”#ffffff” opacity=”10″][hotspotitem]

1: Terminal: con::cube terminal with moni::tool software for data acquisition, data display and station control

[/hotspotitem]

[hotspotitem]

2: Spectrometer: probe All s::can spectrometer probes are multi parameter instruments that can measure a variety of water quality parameters.

[/hotspotitem]
[hotspotitem]

3: Flow cell for spectrometer probe: Including auto brush cleaning device to provide cleaning of the optical measuring windows.

[/hotspotitem]

[hotspotitem]

4: System tubing: Included in panel assembly; Material PA, inside diameter 6 mm, outside diameter8 mm

[/hotspotitem]

[hotspotitem]

5: Flow detector: The flow detector is set to give an alarm if the flow rate decreases below a critical value.

[/hotspotitem]

[hotspotitem]

6: Inlet strainer: The inlet strainer ascertains that no coarse material enters the micro::station.” NPT, with screw cap for sieve removal/cleaning.

[/hotspotitem]

[hotspotitem]

7: Pressure transmitter: (optional) Mounting position for pressure transmitter.

[/hotspotitem]

[hotspotitem]

8: Main panel: Material: PP

[/hotspotitem]

[hotspotitem]

9: Flow restrictor unit: For automatic flow restriction and back flow prevention in by-pass.

[/hotspotitem]

[hotspotitem]

10: Physical probes: Up to four s::can physical probes can be installed in one flow cell.

[/hotspotitem]

[hotspotitem]

11: Physical probe or ISE probe: Place for oxi::lyser, soli::lyser or s::can ISE probe (e.g. ammo::lyser).

[/hotspotitem]

[hotspotitem]

12: Flow cell for physical probes: Combined flow cell for up to four s::can physical probes. Provides quick connect/disconnect design by safety pins to reduce offline time during sensor maintenance.

[/hotspotitem][/cq_vc_hotspot]

See the range of the range.

The s::can range measures a wide range of parameters in numerous applications. All s::can measuring instruments are developed with the same philosophy in mind: They are intelligent, robust and require little to no maintenance.

Intelligent. Optical. OnLine.

The s::can spectrometer probes from PMA Ltd operate using the same measuring principle: Spectrometry. The spectrometer probes are the first and only instruments in the world that can measure optical spectra from 190 to 720 nm directly in liquid media. The materials contained in the medium deteriorate a light beam emanated by a lamp that transfers through the liquid. After contact, its intensity is measured by a sensor over a variety of wavelengths specific to the application.

Knowledgeable, experienced staff

Our team of dedicated field support group technicians are vastly experienced in applications and installations.  We therefore appreciate and understand how analysers work, why they were installed and what data they typically ought to produce.

Spare and replacement parts?

Scroll down to use our contact form to enquire about spare and replacement parts. If you do not know the part number or name for a required spare part please simply describe the spare part. Our team of expert engineers are here to help.

Requesting technical documents?

Submit your details at the bottom of this page and your request will be processed immediately by our team of engineers at PMA. For technical documents please ensure to include details about your application so that our team can deliver a bespoke document for your specific requirements.

To contact us, or to request a callback, simply use the form below and we will promptly get back to you.

An even better reason to contact us about any of our products and services. Your enquiry will get into our new prize draw for HomePod mini.

We greatly value all of the inquiries which our products and services generate and we are very confident that we will have the right solution available for you at the first point of contact when you reach our experienced team of engineers. As an added incentive to any company in the UK, your enquiry about any of our products will get you entered into a prize draw to win a HomePod mini. So what are you waiting for?