Attaching the mounting cleat to the wall
A video to show the installation of the mounting cleat on a wall or backboard.
Attaching the flow body onto the mounting cleat
A video to show the proper installation of the flow body.
Installing the fluidics manager module
A quick guide to show the proper installation of the fluidics manager module
Calibrating a PTV 1000 turbidity analyser with a T Cal plus primary calibration standard
A quick guide to show the calibration of a PTV1000 with the 5NTU T Cal plus standard.
Calibrating a PTV 1000 turbidity analyser with a primary calibration standard
A quick guide to show the calibration of a PTV1000 with a primary calibration standard provided in a bottle.
Assigning a value to a dry verification block
Define the baseline value of the dry verification block for verifying the instrument optics in the future. In this video, a high dry verification block is used. The process of defining the baseline is the same for a low-level dry verification block.
Disassembling the drain cover and replacing the o-ring and siphon tube.
Servicing of the drain cover where the flow switch is located, includes instructions on how to remove the flow body from the mounting cleat.
Disassembling the integrated bubble trap for maintenance
Servicing of the bubble trap and replacing the o-ring.
Maintenance of the light beam dump
Replacing the light beam dump which removes stray light from the flow body.
Replacing the flow body drain valve
Removing and replacing the flow body drain valve and lanyard strap.
Replacing the bubble trap knob
Disassembling the bubble trap knob and replacing it.
