How to choose a TOC analyser or monitor

Build a specification for your sample, your reporting requirements and the decisions your operators need to make.

Start with what the result must tell you

When comparing equipment sold as a TOC analyser, analyzer or monitor, ask what the instrument measures and how the result is obtained. Specify whether you need a direct carbon concentration in mg C/L, an optical trend for early warning, or both.

Reporting or product quality

Check the required method, reporting limit, sample point and sampling frequency. If the requirement is for whole-sample TOC, confirm which solids the intake and sample preparation can pass and how the analyser recovers their organic carbon.

Process warning or control

Define the change that should prompt action, how quickly operators need to see it and how they will confirm it. A UV-based TOC estimate can support this use when the relationship is established for the water and operating conditions.

Compare direct TOC measurement and UV-based estimates

See what each method measures and how to check a UV estimate against laboratory results.

Explore TOC measurement

Put three things in the specification

The sample and its range

Provide normal, low and peak results from existing samples. Describe suspended solids, salinity, temperature and changes in source or production. Identify what the analyser will receive after any settling, filtration or dilution.

The time from sample to alarm

Specify how long a change can go unnoticed. Include transport through the sample line, the analysis cycle, any stream switching and the time before the result reaches the operator.

Maintenance and data availability

Ask for a service schedule covering cleaning, consumables and checks. Agree how the system flags invalid results, maintenance periods and loss of sample flow so these are visible in the operating record.

Two PMA colleagues reviewing information together

Agree how the site trial will be judged

  1. Agree the reference method, acceptable difference from the reference and the maximum time to report a result.
  2. Use paired samples at normal and changing conditions. Record the collection time, analyser status and any sample preparation.
  3. Check the full record for missing results as well as agreement on valid results. Record which conditions the trial covered and when a fresh check will be needed.

For discharges in England, use the permit and the Environment Agency’s monitoring guidance to set the reporting requirements before the trial.

Apply the specification to your site

Tracking a change at a water intake

If the aim is to spot a change after heavy rain or a source switch, check how the UV trend behaves before, during and after the event. Keep the paired lab results and operating record so the team can see when the optical estimate is reliable.

Measuring industrial effluent

If the requirement is for a direct result, trial the complete sample system through expected swings in solids and concentration. Include a high-load period and check whether the reporting delay and sample handling suit the intended duty.

Environment Agency guidance on choosing a monitoring approach

Review sampling, analytical methods and quality assurance for monitoring discharges to water in England.

Read the Environment Agency guidance

Looking after your world since 1971

Share your sample conditions, laboratory results and the decision the measurement needs to support.

Discuss your TOC specification

Let’s talk about your application.

Speak to the PMA team about your instruments, reagents or service requirements. Tell us what you need, and we’ll help you find the right next step.

  • Advice for your application. Find the right instruments, sensors and chemical reagents for your process.
  • Practical service support. Discuss commissioning, calibration, maintenance or an instrument issue with our team.
  • Clear next steps. Ask a technical question or request a callback, with your site and measurements in mind.
  • An enquiry, not a mailing list. Your details are used to respond to you. You won’t be added to a marketing database.

Trusted by our clients

Prefer to speak with us?

Call 01484 843 708

You can also email [email protected].

Tell us how we can help

Share your requirements below. All fields are required.


Your enquiry goes directly to our team. Your details are used to respond to you, and you won’t be added to a marketing database. Read our privacy policy.